How to use the oxygen generator

2021-10-07

1. Install the main engine in rotation on the floor or hang it on the wall with a pylon, and install a gas filter.


2. Nail the gusset of the oxygen generator on the wall or support as needed, and then hang the oxygen generator.


3. Connect the oxygen outlet of the oxygen generator with the oxygen pipe, and connect the 12V power cord of the oxygen supply to the 12V power cord of the host. If multiple oxygen generators are connected in series, you only need to add a three-way connector and use a wire buckle for the pipeline. fixed.


4. Plug the 220V power cord of the host into the wall socket, and the red light of the oxygen supply will be on.


5. Please add pure water to the designated position in the humidifying cup. Then install it on the oxygen outlet of the oxygen concentrator.


6. Put the oxygen delivery tube on the oxygen outlet of the humidification cup.


7. Press the oxygen generator start button, the green indicator light is on, and the oxygen generator starts to work.


8. According to the doctor's advice, adjust the flow to the desired position.


9. Hook up the nasal cannula or wear the mask to inhale oxygen according to the packaging instructions of the oxygen mask or nasal suction tube.

  • QR
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy